DRM JS 30mm version jump button layout change

30mm DRM JS ボタン配置

01Open Web Config

With the unit connected to your PC via USB, enter 192.168.7.1 into your web browser's address bar and access it.

✦ ✦ ✦

02Open the Pin Mapping screen

From the menu, select Configuration → Pin Mapping.

Pin Mapping screen
✦ ✦ ✦

03Swap pin numbers

For example, to swap the R3 button and the ↑ button, set it as follows:

Pin number swap settings

Change PIN02 from UP to R3, and PIN19 from R3 to UP.

Also affects lever operation
If you change the setting for the ↑ button in Web Config, the ↑ on the lever side will also change simultaneously. If you still want to use the lever's ↑, you can use the factory settings, or bend the button terminals, or replace them with lower-profile buttons.
✦ ✦ ✦